Detail SENSOR / PRESSURE TRANSMITTER - SCHNEIDER ELECTRIC
SENSOR / PRESSURE TRANSMITTER
Model No. : SPP110 - 100 kPa
Brand : Schneider Electric
SPECIFICATIONS
* Model No. : SPP110 - 100 kPa
* Range Pressure : 0 - 100 kPa / 0 - 14.5 Psi
* Max. Pressure : 200 kPa / 29.01 Psi
* Max. operating pressure 2 * nominal pressure range Signal Output : 0 – 10 V
* Power : 24 VAC ± 10 % , 15 – 36 VDC
Accuracy
* Total of linearity, hysteresis & repeatability : ± 0.5 % FS
* Zero Point residual voltage : < 50 mV
Temperature in uence
* Medium & ambient temperature : - 40 to 105 º C ( - 40 to 221º F)
* TC zero point : < ± 0, 02% FS/ º K
* TC sensivity : < ± 0.018% FS/ º K
* Load resistance : 10 kOhm
* Current consumption, typical : 15 mA
Ambient Temperature
* Operation : - 40 to 105º C ( - 40 to 221º F )
* Storage : - 40 to 115º C ( - 40 to 239º F )
Materials
* Connection box : Polyamid Plastic
* Mebrane : Stainless Steel
* Enclosure rating : IP 65
* Weight : Max . 130 G ( 0.287 lb )
Standards
EMC : EN 50081-1. EN 50082-1
Pressure Transmitter Wet Media 0-10 V
SPP10 Pressure transmitters are intended for use in HVAC pipe systems to monitor the pressure.
SPP110 is an electronic pressure transmitter that converts the measured pressure into an electric 0-10 V signal.
SPP10 is delivered with 2 m ( 6.6 ft) cable and G1/ 2 adapter nut.
Medium : any medium suitable with stainless steel.
Tampilkan Lebih Banyak